Seq command

Seq is a little known Linux command which is actually quite useful in while loops as it  can generate integer and floating point sequences with given increment. With -f parameter it can also insert them into arbitrary text strings.

By default seq sends to standard output a sequence of numbers.

seq [OPTION]... LAST
seq [OPTION]... FIRST LAST
seq [OPTION]... FIRST INCREMENT LAST  

Options

-f, --format=FORMAT

use printf style floating-point FORMAT (default: %g)

-s, --separator=STRING

use STRING to separate numbers (default: \n)

-w, --equal-width

equalize width by padding with leading zeroes

--help

display this help and exit

--version

output version information and exit

If FIRST or INCREMENT is omitted, it defaults to 1. That is, an omitted INCREMENT defaults to 1 even when LAST is smaller than FIRST. FIRST, INCREMENT, and LAST are interpreted as floating point values. INCREMENT is usually positive if FIRST is smaller than LAST, and INCREMENT is usually negative if FIRST is greater than LAST. When given, the FORMAT argument must contain exactly one of the printf-style, floating point output formats %e, %f, %g  

NEWS CONTENTS

• 20180426 : Bash Range How to iterate over sequences generated on the shell Linux Hint by Fahmida Yesmin ( Apr 26, 2018 , linuxhint.com )
• 20101230 : Seq command - revisited ( September 12, 2006 , Wee Keat's Jumblog )

Old News

[Apr 26, 2018] Bash Range How to iterate over sequences generated on the shell Linux Hint by Fahmida Yesmin

Notable quotes:

"... When only upper limit is used then the number will start from 1 and increment by one in each step. ..."

Apr 26, 2018 | linuxhint.com

Bash Range: How to iterate over sequences generated on the shell 2 days ago You can iterate the sequence of numbers in bash by two ways. One is by using seq command and another is by specifying range in for loop. In seq command, the sequence starts from one, the number increments by one in each step and print each number in each line up to the upper limit by default. If the number starts from upper limit then it decrements by one in each step. Normally, all numbers are interpreted as floating point but if the sequence starts from integer then the list of decimal integers will print. If seq command can execute successfully then it returns 0, otherwise it returns any non-zero number. You can also iterate the sequence of numbers using for loop with range. Both seq command and for loop with range are shown in this tutorial by using examples.

The options of seq command:

You can use seq command by using the following options.

• -w This option is used to pad the numbers with leading zeros to print all numbers with equal width.
• -f format This option is used to print number with particular format. Floating number can be formatted by using %f, %g and %e as conversion characters. %g is used as default.
• -s string This option is used to separate the numbers with string. The default value is newline ('\n').

Examples of seq command:

You can apply seq command by three ways. You can use only upper limit or upper and lower limit or upper and lower limit with increment or decrement value of each step . Different uses of the seq command with options are shown in the following examples.

Example-1: seq command without option

When only upper limit is used then the number will start from 1 and increment by one in each step. The following command will print the number from 1 to 4.

$ seq 4

When the two values are used with seq command then first value will be used as starting number and second value will be used as ending number. The following command will print the number from 7 to 15.

$ seq 7 15

When you will use three values with seq command then the second value will be used as increment or decrement value for each step. For the following command, the starting number is 10, ending number is 1 and each step will be counted by decrementing 2.

$ seq 10 -2 1

Example-2: seq with –w option

The following command will print the output by adding leading zero for the number from 1 to 9.

$ seq -w 0110

Example-3: seq with –s option

The following command uses "-" as separator for each sequence number. The sequence of numbers will print by adding "-" as separator.

$ seq -s - 8

Example-4: seq with -f option

The following command will print 10 date values starting from 1. Here, "%g" option is used to add sequence number with other string value.

$ seq -f "%g/04/2018" 10

The following command is used to generate the sequence of floating point number using "%f" . Here, the number will start from 3 and increment by 0.8 in each step and the last number will be less than or equal to 6.

$ seq -f "%f" 3 0.8 6

Example-5: Write the sequence in a file

If you want to save the sequence of number into a file without printing in the console then you can use the following commands. The first command will print the numbers to a file named " seq.txt ". The number will generate from 5 to 20 and increment by 10 in each step. The second command is used to view the content of " seq.txt" file.

seq 5 10 20 | cat > seq.txt
cat seq.txt

Example-6: Using seq in for loop

Suppose, you want to create files named fn1 to fn10 using for loop with seq. Create a file named "sq1.bash" and add the following code. For loop will iterate for 10 times using seq command and create 10 files in the sequence fn1, fn2,fn3 ..fn10.

#!/bin/bash

for i in ` seq 10 ` ; do
   touch fn. $i
done

Run the following commands to execute the code of the bash file and check the files are created or not.

bash sq1.bash
ls

Examples of for loop with range: Example-7: For loop with range

The alternative of seq command is range. You can use range in for loop to generate sequence of numbers like seq. Write the following code in a bash file named " sq2.bash ". The loop will iterate for 5 times and print the square root of each number in each step.

#!/bin/bash

   for n in { 1 .. 5 } ; do
      (( result =n * n ))

      echo $n square = $result

   done

Run the command to execute the script of the file.

bash sq2.bash

Example-8: For loop with range and increment value

By default, the number is increment by one in each step in range like seq. You can also change the increment value in range. Write the following code in a bash file named " sq3.bash ". The for loop in the script will iterate for 5 times, each step is incremented by 2 and print all odd numbers between 1 to 10.

#!/bin/bash

echo "all odd numbers from 1 to 10 are"

for i in { 1 .. 10 .. 2 }; do 
   echo $i ;
done

Run the command to execute the script of the file.

bash sq3.bash

If you want to work with the sequence of numbers then you can use any of the options that are shown in this tutorial. After completing this tutorial, you will be able to use seq command and for loop with range more efficiently in your bash script.

[Dec 30, 2010] Seq command - revisited

September 12, 2006 | Wee Keat's Jumblog

I realised that I left out another crucial option for the seq command, that is the -f command. This is basically the formatting option, which allows you to format the results using the printf style floating-point FORMAT.

An example:

me@mycomp:~$
me@mycomp:~$ seq -f "line: %g" 1 5
line: 1
line: 2
line: 3
line: 4
line: 5

Now, with the option above, the practical side of it is now very obvious. Let's say I want to generate a pool of test email address… ahh… you see it too eh!

Here we go:

me@mycomp:~$
me@mycomp:~$ seq -f "email_%[email protected]" 1 5
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]

Now, let's generate this email list and have them separated by comma.

me@mycomp:~$
me@mycomp:~$ seq -s ',' -f "email_%[email protected]" 1 5
me@mycomp:~$ [email protected],[email protected],[email protected],[email protected],[email protected]

So… there you go, as promised, a nice and practical example of using the seq command. From now on, if you need a million sample emails in CSV format, just use the following:

me@mycomp:~$
me@mycomp:~$ seq -f "email_%[email protected],firstname,lastname" 1 1000000 > emaillist.txt

You can also pipe them to other commands. Get creative!

Examples

seq 10
1
2
3
4
5
6
7
8
9
10
seq 3 9
3
4
5
6
7
8
9
seq 10 10 110
10
20
30
40
50
60
70
80
90
100
110

seq has c-style format capabilities. For example

seq -f "harvey%02g" 10

will produce a sequence of ten strings each starting with harvey and ending with a number:

harvey01
harvey02
harvey03
harvey04
harvey05
harvey06
harvey07
harvey08
harvey09
harvey10

To make these words into empty files, you use the "touch" comand. "touch" followed by a legal filename will update the timestamp of the file referred to. But, if there is no file of that name, touch creates it!

This can be used for generation of files like in the folllowing example:

touch $(seq -f "harvey%02g" 10)

Recommended Links

Softpanorama Recommended

Top articles

Sites

Etc

Society

Groupthink : Two Party System as Polyarchy : Corruption of Regulators : Bureaucracies : Understanding Micromanagers and Control Freaks : Toxic Managers :   Harvard Mafia : Diplomatic Communication : Surviving a Bad Performance Review : Insufficient Retirement Funds as Immanent Problem of Neoliberal Regime : PseudoScience : Who Rules America : Neoliberalism  : The Iron Law of Oligarchy : Libertarian Philosophy

Quotes

War and Peace : Skeptical Finance : John Kenneth Galbraith :Talleyrand : Oscar Wilde : Otto Von Bismarck : Keynes : George Carlin : Skeptics : Propaganda  : SE quotes : Language Design and Programming Quotes : Random IT-related quotes :  Somerset Maugham : Marcus Aurelius : Kurt Vonnegut : Eric Hoffer : Winston Churchill : Napoleon Bonaparte : Ambrose Bierce :  Bernard Shaw : Mark Twain Quotes

Bulletin:

Vol 25, No.12 (December, 2013) Rational Fools vs. Efficient Crooks The efficient markets hypothesis : Political Skeptic Bulletin, 2013 : Unemployment Bulletin, 2010 :  Vol 23, No.10 (October, 2011) An observation about corporate security departments : Slightly Skeptical Euromaydan Chronicles, June 2014 : Greenspan legacy bulletin, 2008 : Vol 25, No.10 (October, 2013) Cryptolocker Trojan (Win32/Crilock.A) : Vol 25, No.08 (August, 2013) Cloud providers as intelligence collection hubs : Financial Humor Bulletin, 2010 : Inequality Bulletin, 2009 : Financial Humor Bulletin, 2008 : Copyleft Problems Bulletin, 2004 : Financial Humor Bulletin, 2011 : Energy Bulletin, 2010 : Malware Protection Bulletin, 2010 : Vol 26, No.1 (January, 2013) Object-Oriented Cult : Political Skeptic Bulletin, 2011 : Vol 23, No.11 (November, 2011) Softpanorama classification of sysadmin horror stories : Vol 25, No.05 (May, 2013) Corporate bullshit as a communication method  : Vol 25, No.06 (June, 2013) A Note on the Relationship of Brooks Law and Conway Law

History:

Fifty glorious years (1950-2000): the triumph of the US computer engineering : Donald Knuth : TAoCP and its Influence of Computer Science : Richard Stallman : Linus Torvalds  : Larry Wall  : John K. Ousterhout : CTSS : Multix OS Unix History : Unix shell history : VI editor : History of pipes concept : Solaris : MS DOS :  Programming Languages History : PL/1 : Simula 67 : C : History of GCC development :  Scripting Languages : Perl history   : OS History : Mail : DNS : SSH : CPU Instruction Sets : SPARC systems 1987-2006 : Norton Commander : Norton Utilities : Norton Ghost : Frontpage history : Malware Defense History : GNU Screen : OSS early history

Classic books:

The Peter Principle : Parkinson Law : 1984 : The Mythical Man-Month :  How to Solve It by George Polya : The Art of Computer Programming : The Elements of Programming Style : The Unix Hater’s Handbook : The Jargon file : The True Believer : Programming Pearls : The Good Soldier Svejk : The Power Elite

Most popular humor pages:

Manifest of the Softpanorama IT Slacker Society : Ten Commandments of the IT Slackers Society : Computer Humor Collection : BSD Logo Story : The Cuckoo's Egg : IT Slang : C++ Humor : ARE YOU A BBS ADDICT? : The Perl Purity Test : Object oriented programmers of all nations : Financial Humor : Financial Humor Bulletin, 2008 : Financial Humor Bulletin, 2010 : The Most Comprehensive Collection of Editor-related Humor : Programming Language Humor : Goldman Sachs related humor : Greenspan humor : C Humor : Scripting Humor : Real Programmers Humor : Web Humor : GPL-related Humor : OFM Humor : Politically Incorrect Humor : IDS Humor : "Linux Sucks" Humor : Russian Musical Humor : Best Russian Programmer Humor : Microsoft plans to buy Catholic Church : Richard Stallman Related Humor : Admin Humor : Perl-related Humor : Linus Torvalds Related humor : PseudoScience Related Humor : Networking Humor : Shell Humor : Financial Humor Bulletin, 2011 : Financial Humor Bulletin, 2012 : Financial Humor Bulletin, 2013 : Java Humor : Software Engineering Humor : Sun Solaris Related Humor : Education Humor : IBM Humor : Assembler-related Humor : VIM Humor : Computer Viruses Humor : Bright tomorrow is rescheduled to a day after tomorrow : Classic Computer Humor

The Last but not Least Technology is dominated by two types of people: those who understand what they do not manage and those who manage what they do not understand ~Archibald Putt. Ph.D

The statements, views and opinions presented on this web page are those of the author (or referenced source) and are not endorsed by, nor do they necessarily reflect, the opinions of the Softpanorama society. We do not warrant the correctness of the information provided or its fitness for any purpose. The site uses AdSense so you need to be aware of Google privacy policy. You you do not want to be tracked by Google please disable Javascript for this site. This site is perfectly usable without Javascript.

Last modified: September 02, 2019