Softpanorama Bulletin
Vol 22, No. 03 (July, 2010)

Shell Giants

• Introduction to the Unix shell history
• The Bourne Shell Family
• C-shell family (c-shell and tcsh)
• Zsh and other "post-scripting languages" shells
• Visual shells and Orthodox file managers
• Shells History Webliography
• Appendix 1:
  • Shell History by John Mashey
• Appendix 2:
  •  An Introduction to the C shell by William Joy (revised for 4.3BSD by Mark Seiden)
• Appendix 3:
  • An Introduction to the UNIX Shell by S. R. Bourne.

Introduction to the Unix shell history

The UNIX system was one of the first operating systems that didn't make the command interpreter a part of the operating system or a privileged task. It became an application program somewhat similar to compilers. This idea, like many other Unix ideas, was taken from Multics which in turn was influenced by CTSS, developed by Fernando J. Corbató .

For CTSS MIT Computation Center staff member Louis Pouzin created for CTSS a command called RUNCOM, which executed a list of commands contained in a file. RUNCOM  allowed parameter substitution. He later created a design for the Multics shell, which in turn inspired Unix shell scripts. 

This approach to shell as a separate program pioneered by CTSS and Multics made Unix a fertile ground for scripting development and Unix essentially pioneered scripting as we know it: Unix was the development  environment in which AWK, C-shell,  ksh and later Perl emerged and gain initial popularity, before they ware ported to other OSes.

Another influence was system 360 with its JCL language developed around 1962 for world-famous IBM System/360 series.  In early 1970th it was a dominant computer family.

I would like to stress again that shell in Unix was a stand-alone program, a command interpreter with few special permissions and kernel level calls. This rather novel concept proved to be fruitful and has led to a succession of better and better shells.

Unix shells have a long history and we can talk about four distinct generations of Unix shells:

1. First generation shells  (Thomson shell and Mashey shell)
2. Second generation shells (C-shell and Bourne shell, which were developed in parallel and in which Bill Joy  team provided really strong competition to professionals from AT&T ;-).  In many ways C-shell represented a real breakthrough as it was more programmable (even the name implies closeness to C) and more flexible then any of the previous generations of the shells
3. Third generation shells (tcsh and ksh88)
4. Fourth generation shells (ksh93, bash. zsh and, especially, Microsoft Power Shell)

First generation shells

The first generation shells were descendant of Multics shell. The first of them was Thomson shell. It was the first Unix shell and as such it was very primitive with only basic control structures and no variables. The shell's design was intentionally minimalistic; even the if and goto statements, essential for control of program flow, were implemented as separate external commands [ Thompson shell - Wikipedia, the free encyclopedia] Despite its shortcomings Thomson shell was a definite improvement over the shell that people used most (IBM JCL).

The Mashey shell (also known as PWB shell) was the second representative of the first generation of  Unix shells.  It was written and maintained by John Mashey (now a chief scientist at Silicon Graphics, who since 1998 owns a nameplate UNIX in California, previously owned by Ted Dolotta ;-).  It was distributed with Programmer's Workbench UNIX one of early versions of Unix that existed from 1975 to 1977.

As Mashey recollected in  Languagesm Levels, Libraries and Longevity

In 1970, “real computers” were still mainframes, although minicomputers were seeing increasing use. The DEC (Digital Equipment Corporation) 16-bit PDP-11 was introduced in 1970, and of particular importance, the PDP-11/45 appeared in 1972, with up to 248 KB of MOS (metal-oxide semiconductor) memory. By 1975, the PDP-11/70 allowed a huge increase to 4 MB, although each program was still restricted to 64 KB instructions and 64 KB data. Some sites supported 16 simultaneous users on an 11/45, and with heroic effort, 48 on an 11/70. The VAX-11/780 was introduced in 1977 and spread lower-cost 32-bit computing more widely. By the end of the decade, minicomputers were “real computers,” and 32-bit microcomputers were beginning to appear.

In 1970, there was widespread use of applications languages such as Fortran, Cobol, and PL/I, but many applications’ and most systems’ codes were still written in assembly language, and the idea that an operating system would be portable among machines was laughable. In the end, Unix was ported to many systems, C was widely used, and applications were being written with various combinations of higher-level tools.

In 1973, the PWB (Programmer’s Workbench) began in a Bell Labs software tools department.4 It supported a 1,000-person division that produced database and communications application software products that ran on various mainframes and minicomputers. It wished to move many programming activities off expensive mainframes onto a common Unix-based development environment to avoid the creation of unique support software for each target system. Programming departments needed to be convinced to change their ways, that Unix was a good thing, that minicomputers were not toys, and that they should transfer budget to the tools department for more PDP-11s.

In 1973, most of the several dozen existing Unix systems were the property of individual departments, used by small numbers of people for their own projects and administered informally, sometimes with minimal security. The PWB site was the first in Bell Labs to run a “Unix computer center” for shared general use among departments, including typing pools. For years it was the largest single Unix site, and it often endured early encounters with problems of scalability, system administration, charging, security, automation, and usability for nontechnical users.

In 1973, Ken Thompson’s Unix shell was primarily used as an interactive interpreter, but had some rudimentary scripting ability, including separate IF and GOTO commands. In 1974, I used shell scripts to build a small document management package for a potential client department and found this to be a great way to build such software quickly, but with awkward restrictions. In 1975 and 1976 the PWB’s shell got simple variables, better control structures (IF-THEN-ELSE-ENDIF, SWITCH, WHILE), and interrupt-catching. The variables that later became $HOME (home directory) and $PATH (variable search path for commands) date from this effort.

Shell programming rapidly became a widespread mechanism for PWB users to help automate their work.5 Substantial CPU time was consumed by shell procedures, to the point where previously separate commands, such as IF, GOTO, and SWITCH, were moved into the shell itself with substantial performance improvements. Steve Bourne was then working on a brand-new shell in Computing Research and, after much discussion, evolved a fresh design whose performance and features were interesting enough to eventually replace the PWB shell. The variables got generalized into the “environment variables” designed for 7th Edition Unix.

Al Aho, Peter Weinberger, and Brian Kernighan had written awk, the philosophical ancestor of some popular current scripting languages. In the 1970s, Bell Labs was busily constructing computer systems to improve Bell System operations, and many were built on Unix and even used scripting languages in delivered software. CRAS (Cable Repair Adminstrative System) was a data-mining software package that integrated data from several other systems, was distributed between IBM mainframes and Unix minicomputers, had to be deployed quickly, and was sensitive to organization-dependent requirements in a time of major reorganization.6 The first version included 10 KLOC (thousands of lines of code) of C plus 15 KLOC of shell+awk scripts and was modified quickly in the field to adapt to newly revealed customer requirements. A large listing of these scripts appeared on Kernighan’s desk—to his great surprise, as the awk writers had never expected such extensive use in production.

Shell scripting used late-binding, high-level interpretation to combine higher-performance, compiled components. Awk gave us a more flexible language above C, although we sometimes later converted heavily used awk to C for performance, after requirements had settled. We sometimes wished for an awk compiler. Raising the language level enabled vast improvements in productivity in that decade, as C replaced assembly language, and script-level languages greatly augmented C.

While it was a derivative of Thomson shell it introduced several features that make shell more suitable for programming.  Among important innovations introduced by Mashey shell:

• The if-then-else and goto commands were made internal to the shell, and switch and while constructs were also introduced.
• Simple variables could be used, although their names were limited to one letter and some letters were reserved for special purposes.
• The $ character, used previously for identifying arguments to a shell script, became the marker for dereferencing a variable, and could be used to insert a variable's value into a string in double quotes (this feature became standard in many scripting languages like Perl and PHP).

The second generation of shells

The next, the second generation of shells was defined by C-shell and Bourne shell which were developed in parallel. And that parallelism actually shows tremendous difference in talents between Bill Joy and Steve Bourne.  While Bourne shell was hampered by compatibility requirements, Steve Bourne did a remarkably poor job in the area of lexical structure and syntax. It's fair to say that Bourne shell has no relation whatsoever to his previous experience with Algol68 compilers. Any notion that a person who participated in Algol68 compiler development would make architectural decisions that were made in Bourne shell is a joke. In other words as a product Bourne shell is a shame for any decent compiler writer.  Its a completely amateurish product. That is very strange as  Steve Bourne run a project in the Cambridge Computer Laboratory to implement a version of Algol 68 called ALGOL68C. And Algol68 compiler designers were the elite of compiler writing community.

In a way we still are suffering from Steve Borne mistakes and blunders. It's actually amazing that work on AWK, a definitely superior design and architecture was by-and-large a parallel development which never seriously influenced the design of Borne shell.  Lately he tried to promote  a revisionist version of history and in his latest interview to Computer World (Bourne shell, or sh  - Computerworld) forgot to mention that the prototype for his shell was Mashey shell, not the original Thompson shell and the former did had switch and while constructs (see above; also see Mashe shell man page):

My own interest, before I went to Bell Labs, was in programming language design and compilers. At Cambridge I had worked on the language ALGOL68 with Mike Guy. A small group of us wrote a compiler for ALGOL68 that we called ALGOL68C. We also made some additions to the language to make it more usable. As an aside we boot strapped the compiler so that it was also written in ALGOL68C.

When I arrived at Bell Labs a number of people were looking at ways to add programming capabilities such as variables and control flow primitives to the original shell. One day [mid 1975?] Dennis [Ritchie] and I came out of a meeting where somebody was proposing yet another variation by patching over some of the existing design decisions that were made in the original shell that Ken wrote. And so I looked at Dennis and he looked at me and I said “you know we have to re-do this and re-think some of the original design decisions that were made because you can’t go from here to there without changing some fundamental things”. So that is how I got started on the new shell.

Was there a particular problem that the language aimed to solve?

The primary problem was to design the shell be a fully programmable scripting language that could also serve as the interface to users typing commands interactively at a terminal.

First of all, it needed to be compatible with the existing usage that people were familiar with. There were two usage modes. One was scripting and even though it was very limited there were already many scripts people had written. Also, the shell or command interpreter reads and executes the commands you type at the terminal. And so it is constrained to be both a command line interpreter and a scripting language. As the Unix command line interpreter, for example, you wouldn’t want to be typing commands and have all the strings quoted like you would in C, because most things you type are simply uninterpreted strings. You don’t want to type ls directory and have the directory name in string quotes because that would be such a royal pain. Also, spaces are used to separate arguments to commands. The basic design is driven from there and that determines how you represent strings in the language, which is as un-interpreted text. Everything that isn’t a string has to have something in front of it so you know it is not a string. For example, there is $ sign in front of variables. This is in contrast to a typical programming language, where variables are names and strings are in some kind of quote marks. There are also reserved words for built-in commands like for loops but this is common with many programming languages.

So that is one way of saying what the problem was that the Bourne Shell was designed to solve. I would also say that the shell is the interface to the Unix system environment and so that’s its primary function: to provide a fully functional interface to the Unix system environment so that you could do anything that the Unix command set and the Unix system call set will provide you. This is the primary purpose of the shell.

One of the other things we did, in talking about the problems we were trying to solve, was to add environment variables to Unix system. When you execute a command script you want to have a context for that script to operate in. So in the old days, positional parameters for commands were the primary way of passing information into a command. If you wanted context that was not explicit then the command could resort to reading a file. This is very cumbersome and in practice was only rarely used. We added environment variables to Unix. These were named variables that you didn’t have to explicitly pass down from the parent to the child process. They were inherited by the child process. As an example you could have a search path set up that specifies the list of directories to used when executing commands. This search path would then be available to all processes spawned by the parent where the search path was set. It made a big difference to the way that shell programming was done because you could now see and use information that is in the environment and the guy in the middle didn’t have to pass it to you. That was one of the major additions we made to the operating system to support scripting.

How did it improve on the Thompson shell?

I did change the shell so that command scripts could be used as filters. In the original shell this was not really feasible because the standard input for the executing script was the script itself. This change caused quite a disruption to the way people were used to working. I added variables, control flow and command substitution. The case statement allowed strings to be easily matched so that commands could decode their arguments and make decisions based on that. The for loop allowed iteration over a set of strings that were either explicit or by default the arguments that the command was given.

I also added an additional quoting mechanism so that you could do variable substitutions within quotes. It was a significant redesign with some of the original flavor of the Thompson shell still there. Also I eliminated goto in favour of flow control primitives like if and for. This was also considered rather radical departure from the existing practice.

Command substitution was something else I added because that gives you very general mechanism to do string processing; it allows you to get strings back from commands and use them as the text of the script as if you had typed it directly. I think this was a new idea that I, at least, had not seen in scripting languages, except perhaps LISP.

---

How long did this process take?

It didn’t take very long; it’s surprising. The direct answer to the question is about maybe 3-6 months at the most to make the basic design choices and to get it working. After that I iterated the design and fixed bugs based on user feedback and requests.

I honestly don’t remember exactly but there were a number of design things I added at the time. One thing that I thought was important was to have no limits imposed by the shell on the sizes of strings or the sizes of anything else for that matter. So the memory allocation in the implementation that I wrote was quite sophisticated. It allowed you to have strings that were any length while also maintaining a very efficient string processing capability because in those days you couldn’t use up lots of instructions copying strings around. It was the implementation of the memory management that took the most time. Bugs in that part of any program are usually the hardest to find. This part of the code was worked on after I got the initial design up and running.

The memory management is an interesting part of the story. To avoid having to check at run time for running out of memory for string construction I used a less well known property of the sbrk system call. If you get a memory fault you can, in Unix, allocate more memory and then resume the program from where it left off. This was an infrequent event but made a significant difference to the performance of the shell. I was assured at the time by Dennis if this was part of the sbrk interface definition. However, everyone who ported Unix to another computer found this out when trying to port the shell itself. Also at that time at Bell Labs, there were other scripting languages that had come into existence in different parts of the lab. These were efforts to solve the same set of problems I already described. The most widely used “new” shell was in the programmer’s workbench -- John Mashey wrote that. And so there was quite an investment in these shell scripts in other parts of the lab that would require significant cost to convert to a the new shell.

The hard part was convincing people who had these scripts to convert them. While the shell I wrote had significant features that made scripting easier, the way I convinced the other groups was with a performance bake off. I spent time improving the performance, so that probably took another, I don’t know, 6 months or a year to convince other groups at the lab to adopt it. Also, some changes were made to the language to make the conversion of these scripts less painful.

How come it fell on you to do this?

The way it worked in the Unix group [at Bell Labs] was that if you were interested in something and nobody else owned the code then you could work on it. At the time Ken Thompson owned the original shell but he was visiting Berkeley for the year and he wasn’t considering working on a new shell so I took it on. As I said I was interested in language design and had some ideas about making a programmable command language.

A very influential development of AWK by far more talented team which enjoyed more advanced design, understanding of scripting and clean lexical and syntax levels happened on sidelines. Like in any large organization left hand in Bell Labs does not know what right hand was doing. Due to this unfortunate fact and complete lack of architectural vision of Unix project managers AWK did not get enough traction to be extended into replacement or more tightly integrated into shell.  BTW the fact the Steve Bourne was unable/unwilling to borrow ideas from AWK development is also pretty telling.

Another parallel development was REXX which later was used as a shell in VM/CMS environment:

• AWK was originally written in 1977, and distributed with Version 7 Unix. The book The AWK Programming Language, the first scripting book was published 1988.  The designers of AWK were higher class language designers then Stephen Bourne but unfortunately they did not get enough traction/support to extend AWK into full fledged shell. Notion that Unix should consist of small number of tools backfired in this case.  Not only AWK became instantly popular when it was introduced but it also stimulated the creation of the next generation of scripting languages: 10 years later Larry Wall created Perl, which is now one of the most popular scripting language in the world. Despite its age AWK remains important standard Unix utility.

  The prototype for the development of AWK was GREP. But GREP had a very limited form of pattern action processing, so the authors generalized the capabilities of GREP considerably. They also managed to exploit similarity between string matching and the compiler construction tools LEX (generator of lexical scanners) and YACC (generator of lexical analyzers)  These compiler construction utilities  were widely used in Bell labs to create specialised little languages ( Brian Kernighan was one of the first users). For example LEX provide the language with a distinct "lexical" level: program can be converted into a sequence of  lexemes or tokens. The latter are sequences of characters that make up logical units like identifier, quoted string, comment, etc. This is classic first pass that the compilers perform on the input and it a distinct lexical structure is a must for any solid scripting language.

  AWK was designed as a specialized language for processing text files treated as a sequence of lines but proved to be more powerful than that.  An AWK program is of a sequence of pattern-action statements. AWK reads the input a line at a time splitting records into fields. Each line is scanned for patterns present in AWK program and for each match, the associated action is executed.  The patterns can be Boolean combinations of strings and numbers; the actions can be statements in a C-like programming language.

   Here is how Axo recollected the events(AWK - Computerworld):

  AWK was developed by three people: me, Brian Kernighan and Peter Weinberger. Peter Weinberger was interested in what Brian and I were doing right from the start. We had created a grammatical specification for AWK but hadn't yet created the full run-time environment. Weinberger came along and said 'hey, this looks like a language I could use myself', and within a week he created a working run time for AWK. This initial form of AWK was very useful for writing the data processing routines that we were all interested in but more importantly it provided an evolvable platform for the language.

  One of the most interesting parts of this project for me was that I got to know how Kernighan and Weinberger thought about language design: it was a really enlightening process! With the flexible compiler construction tools we had at our disposal, we very quickly evolved the language to adopt new useful syntactic and semantic constructs. We spent a whole year intensely debating what constructs should and shouldn't be in the language.

  Language design is a very personal activity and each person brings to a language the classes of problems that they'd like to solve, and the manner in which they'd like them to be solved. I had a lot of fun creating AWK, and working with Kernighan and Weinberger was one of the most stimulating experiences of my career. I also learned I would not want to get into a programming contest with either of them however! Their programming abilities are formidable.

  Interestingly, we did not intend the language to be used except by the three of us. But very quickly we discovered lots of other people had the need for the routine kind of data processing that AWK was good for. People didn't want to write hundred-line C programs to do data processing that could be done with a few lines of AWK, so lots of people started using AWK.

  For many years AWK was one of the most popular commands on UNIX, and today, even though a number of other similar languages have come on the scene, AWK still ranks among the top 25 or 30 most popular programming languages in the world. And it all began as a little exercise to create a utility that the three of us would find useful for our own use.

• Steve Bourne, at Bell Labs, worked on extension of Mashey shell starting from 1975 and this shell was released in 1977-1978 as Bourne shell. Steve previously was involved with the development of Algol-68 compiler but that influenced his design only very superficially as Algol-68 syntax sugar in if statement and loops (if ... fi syntax is the trademark of Algol86; paradoxically a  non Algol-68 syntax was used for the for loop for ... do ... done ). As a language it was a huge step back from AWK, almost a disaster and inability of AT&T management to see the difference is a huge black spot in Unix history and Bell Labs history.  In retrospect Algol-68 syntax sugar looks bizarre and completely out of line with the rest of the Unix and first of all with the C-language. And what is really strange for the designer who came from Algol-68 compiler development environment, the first version did not provided for comments (as Sven Mascheck  noted comments were available via ":"(colon) command, but not without side effects). Still despite all shortcomings and weakness of Steve Bourne as a developer Bourne shell made some steps in formulating Unix component development paradigm: use many small, flexible programs as tools glued by shell. Despite huge shortcomings it was "good enough" and it became a classic Unix shell and slowed down shell development for many decades. Actually it's a shame that the weight of Bell Labs prevented adoption of C-shell as the standard shell and further development along C-shell lines. 

  The Bourne shell, became the default Unix shell of Unix Version 7. Despite huge shortcomings, until recently Bourne shell for some strange reasons remained the default shell in Solaris and a couple of other commercial Unixes.
   

• C shell (csh) was a ground breaking shell that was written by Bill Joy and first distributed with BSD in 1978-79. Bill Joy essentially wiped the floor with AT&T shell design team (and personally with Steve Bourne) introducing more elegant and more compatible with C scripting language which contained some neat ideas and generated tremendous following. Unfortunately Bill Joy did not continue the development and shell stagnated. Despite this C-shell and its modification (tcsh) remained best interactive shells till probably year 2000.

  Not only C-shell was vastly superior interactive shell, C-shell innovations brought it closer to scripting language. Among them "built-ins" where several of the most common utilities were built into the shell. Another very important innovation was C-like syntax that made it easier for C-programmers to use the shell and made it look like a new albeit slightly strange programming language, not just a job control language.  Features like built-in arithmetic operations and C language expression syntax were a huge move forward in comparison with Bourne shell. That happened partially due to the increased capacity of the machines that became standard for this period.  But again the ides of syntax compatibility with C was the key idea that made C-shell the most close ancestor to modern scripting languages.
   

• The first important non-Unix scripting language and shell that was more or less widely used was probably REXX which was designed and first implemented between 1979 and mid-1982 by Mike Cowlishaw of IBM.   It trails AWK by several years, but by and large can be considered parallel independent reinvention of the concept. The pioneering feature of REXX was that it from the beginning was design a macro language and can be used as an internal language for applications. One such application (Xedit) survived from those dinosaur epoch.  It was used as shell in VM/CMS and later in Amiga OS and OS/2

The third generation of shells

The third generation of shells was by-and large a reaction of C-shell.  It includes the extension of C-shell called tcsh and Korn shell (version which later became known as ksh88). POSIX shell belongs to the same category.

• In 1981 C-shell was extended into tcsh, which for a long time (probably until 2000) was the most popular interactive shell in Unix. Tcsh is C shell with file name completion, command line editing and other features such as enhanced variable modifiers. All this made tcsh one of the most convenient shells for interactive users. In tcsh environment variables are defined in upper and lowercase. Usually uppercase parameters refer to parameters seen by all shells(global environment), while lowercase parameters are specific to the particular instance of shell specific. As an example the path variable is set both as PATH and path. Uppercase parameters are listed by the built-in command environment and lowercase parameters are listed/set by the built-in command set run without options.

  It was influenced by TENEX OS. TENEX and TOPS-20 up until version 3, had command completion via a user-code-level subroutine  library  called  ULTCMD. Tcsh provides an emacs and vi command-line editing modes. While it was based on Joy's original source, many people have added to tcsh since. Over 50 names are listed as contributors in the 6.08 man page.
   

• The Korn shell (ksh) was a reaction to C-shell which was developed by David Korn (AT&T Bell Laboratories) in the early 1980s. It is backwards compatible with the Bourne shell and includes many features of the C shell as well as new features like a command history, which was inspired by the requests of Bell Labs users. It was released in 1983.  Essentially he attempted to incorporate main ideas of C-shell into Borne shall framework. Ksh proved to more powerful and flexible shell than the Bourne shell, but it failed to match either C-shell or Tcsh as interactive shell. Among other things it lacked arrow history browsing, the "!!" and "!$" features of C-shell, etc.  David Korn was more talanted shell designer then Steve Bourne and the shell was much more solid with more clean semantic (syntax and lexical level remained a mess due to compatibility requirements). The main problem with ksh was that while in power it approach scripting languages it did not have a build-in debugger.

  The original version of Korn Shell, which is now usually called ksh88 became a dominant shell for commercial Unixes. It introduced several interesting attributes (read-only, uppercase, lowercase attributes for strings, etc.). Due to restrictions in distribution (it was a commercial product, not an open source) several free open source clones like pdksh and bash were created. Due to popularity of  bash, usage of Korn shell currently is now mainly limited to commercial environment and power users who understand the difference in the quality of implementation or need more compatible implementation between Unix and Windows. 
   

• Some attempts to standardize shell were attempted by POSIX group as a reaction from IBM and others to the treat to ST&T Sun alliance. The level of standardization was very low as they took ksh88 as a base ("status quo standardization") and the standard does not proposed any interesting features.  

Forth generation of shells

Perl, the first "post-modern" scripting language was first released in 1987. It represented a breakthrough that lifted scripting of a qualitatively new level. It was immediately clear that for Unix scripts Perl represent a much better language that shells although in some parts in was lower level language (limited support of pipes). All subsequent popular scripting languages like Python, PHP, Ruby to name a few are in a way derivatives of Perl. The forth generation of shell were also influenced by Perl popularity and one of them (ksh93) was, in part, a reaction to Perl popularity.

Another important development was the creation of  Tcl. Tcl was first scripting language designed to be a macro language for other applications. While Perl was an attempt to integrate functionality of the shell and AWK into a single product TCL extended shell functionality into new area. TCL never managed to Neither replace shell (and it was never intended to), although it is probably not so difficult to create a shell based on Tcl (one was created on the base of Korn shell by David Korn son). There were also some attempts to use Perl as a shell (Perl shell).

 Two new "forth-generation" shells were written after Perl was created and incorporated some innovations introduced by Perl and TCL but in old shell-style framework:

• In 1990, Paul Falstad wrote zsh, a superset of the ksh88 which also had many csh features.  Z-shell was the latest attempt to merge C-shell and Korn shell and it provided enhancements in globbing and other areas in non-orthogonal Perl-style manner. Some people dismiss zsh as too bloated and suffering from the feature creep.  Still along with the ksh93 it is still probably the most powerful shell for Unix and many power users like its power and flexibility.  As David Korn remarked:

  "There are two different areas of functionality in shells. First is interactive use and the second is scripting. Much of the debate about shells has focused on interactive use only. For example, tcsh is an acceptable shell for interactive use but practically unusable for scripting."

  It proved to be very difficult to reconcile those two areas and zsh remains one of the important early attempts in this direction.
   
• Ksh93 was later and more coherent attempt to merge shell with some functionality of  Tcl and Perl and integrate their most interesting features back into the shell framework. As a programming language, it has comparable speed and functionality to each of these languages. But still string manipulation was weaker and due to "compatibility curse" it used pretty wild syntax. That was an important drawback.

  Also David Korn make a strategic mistake of not providing a build-in debugger which was necessary for such a  complex language.

  All-in-all the attempt to match Tcl and Perl largely failed, but the power of shell is impressive and it became a inspiration for other shell developers (bash 3.0 is one example, see below, but many complain that it's too bloated). Ksh93 can be considered as a superset of the POSIX 1003.2 shell standard. Paradoxically due to the quality of Uwin ksh93 is widely used on windows (it is a part as Uwin environment; in terms of technology, Uwin's process management was certainly much faster, and I/O subsystem is much better then Cygwin. The system runtime uses AST library, which is also very well done). One of the major Indian outsourcers Wipro for some time supported Uwin as a product. Like Tcl, ksh93 is extensible and embeddable with a C language API. There are also two graphical shells based on Ksh93 --  dtksh, is a Motif based language developed by Novell (somewhat popular of Solaris as it is included in CDE environment) and Tksh, written by Jeff Korn at Princeton University (it includes TCL functionality directly into the shell). None got any significant following.

  In March 2000 AT&T opened ksh93 and the whole Uwin package and licensed them using  very liberal the Common Public License Version 1.0 (CPL-1.0). Here is the announcement from kornshell.com

  March 1, 2000: I am happy to announce the 'i' point release of ksh93 is now available for download. For the first time, source is available as well as binaries for several architectures. If you build binaries for new architectures, and send them to us, we can add them to the download site. The download page has been completely revised in a manner that hopefully will be easier to use. ksh93 is part of the ast-open package. tksh (ksh with tk support) is also part of this package.

• bash at the beginning was a "retro" shell, a second rate shell which did not introduced any important innovations, and which was written as an alternative to commercial Korn shell for purely ideological reasons: it was part of GNU project. With time it was extended incorporating most ksh88 and, later, some ksh93 features. Bash was originally written by Brian Fox of the Free Software Foundation. In 1997 Bash 2.0 closed the gap in power with ksh88, while some features remain broken (pipe implementation).  Later bash 3.2 became pretty close in functionality to ksh93.  With version 3.2 became prominent forth generation shell of its own, eclipsing all others members of this family.

  In 2004 Bash 3.0 introduced a built-in debugger, the feature that unfortunately was absent in previous shells (although there were add-on scripts for ksh that provided some debugging capabilities).  At the same time size of the code raise suspicions about "bloatware dead end" of this open source product.
   

• Hamilton C shell was another C-shell extension. See the on-line user guide for details.  It is a commercial shell but a free demo version is available for download.
   
• Windows PowerShell (formerly know as Monad) is ksh-style shell with some Microsoft specific extensions. It integrates with .NET Framework and provides an environment to perform administrative tasks by execution of cmdlets (pronounced commandlets) which are specialized .NET classes implementing a particular operation. Windows PowerShell also provides a hosting mechanism with which the Windows PowerShell runtime can be embedded inside other applications, which can then leverage Windows PowerShell functionality to implement certain operations, including those exposed via the graphical interface.

Back into the future -- Retro shells

There was also distinct line of development that can be called retro-shells. One of the most prominent members of this family was pdksh which was an attempt to re-implement ksh88. It did not get much traction and only bash, another retro-shell, remains viable those days as it is used as the standard shell in Linux.   

Possible future developments

Still one needs to understand that currently shells are pretty archaic family of scripting languages and outside of interactive usage their generally outlived their usefulness. That's why for more or less complex tasks Perl is usually used instead of shells.

While shells continued to improve since the original C-shell and Korn shell (Borne shell from the language standpoint is just a joke), the shell syntax is frozen in space and time and now looks completely archaic.  There are a large number of problems with this syntax as it does not cleanly separate lexical analysis from syntax analysis.

Some syntax features in shell are idiosyncratic as Steve Bourne played with Algol 68 before starting work on the shell. He proved to be a bad language designer: there is very little logic in how  different types of blocks are ended. Conditional statements end with broken classic Algor-68 the reverse keyword syntax: 'if condition; then echo yes; else echo no; fi', but loops are structure like perverted version of PL/1 (do; done;) , individual case branches blocks ends with ';;' . Functions have C-style bracketing "{", "}".  M. D. McIlroy  should be ashamed as the result ;-).

rm $file

Variable assignments in Bourne shell are whitespace sensitive. 'foo=bar' is an assignment, but 'foo = bar' is not. This is another strange idiosyncrasy.

There is also an overlap between aliases and functions. Aliases are positional macros that are recognized only as the first word of the command like in classic  alias ll='ls -l'.  Because of this, aliases have several limitations:

• You can only redirect input/output to the last command in the alias.
• You can only specify arguments to the last command in the alias.
• Alias definitions are a single text string, this means complex functions are nearly impossible to create.

ll() { ls -l $*; }

Since the use of variables as commands is allowed, it is impossible to reliably check the syntax of a script as substitution can accidentally result in key word as in example that I found in the paper about fish (not that I like or recommend fish):

if true; then if [ $RANDOM -lt 1024 ]; then END=fi; else END=true; fi; $END

One way to alleviate those problems is the introduction of deprecation mechanism. It can be done via POSIX framework (which currently is stagnant).

 Clean definition of lexical level in shells can help too. As the number of legacy scripts is substantial any improvements can be done only with the simultaneous introduction of automatic converters.

Paradoxically currently the only sizable entity working on improvement of  shells is Microsoft.  According to Wikipedia:

Microsoft is working on the next version of PowerShell and has made a CTP release of the same publicly available. It includes changes to the scripting language and hosting API, in addition to including a number of cmdlets. A non-exhaustive list of the new features is:^[27]

1. PowerShell Remoting: Using WS-Management, PowerShell 2.0 allows scripts and cmdlets to be invoked on a remote machine or a large set of remote machines.
2. Background Jobs: Also called a PSJob, it allows a command sequence (script) or pipeline to be invoked asynchronously. Jobs can be run on the local machine or on multiple remote machines. A PSJob cannot include interactive cmdlets.
3. ScriptCmdlets: These are cmdlets written using the PowerShell scripting language.
4. SteppablePipelines: This allows the user to control when the BeginProcessing(), ProcessRecord() and EndProcessing() functions of a cmdlet are called.
5. Data Language: A domain-specific subset of the PowerShell scripting language, that allows data definitions to be decoupled from the scripts and allow localized string resources to be imported into the script at runtime.
6. Script Debugging: It allows breakpoints to be set in a PowerShell script or function. Breakpoints can be set on lines, line & columns, commands and read or write access of variables. It includes a set of cmdlets to control the breakpoints via script.
7. New Cmdlets: Including Out-GridView, which displays tabular data in the WPF GridView object.
8. New Operators: -Split -Join and @ operators.
9. New APIs: The new APIs range from handing more control over the PowerShell parser and runtime to the host, to creating and managing collection of Runspaces (Runspace Pools) as well as the ability to create restricted Runspaces which only allow a configured subset of PowerShell to be invoked.
10. Graphical PowerShell: PowerShell 2.0 includes a GUI-based PowerShell host that provides integrated debugger, syntax highlighting and up to 8 PowerShell consoles (Runspaces) in a tabbed UI, as well as to run only the selected parts in a script.. However, it is a very early release which suffers from performance problems with large scripts and does not include tab completion.

Etc

Society

Groupthink : Two Party System as Polyarchy : Corruption of Regulators : Bureaucracies : Understanding Micromanagers and Control Freaks : Toxic Managers :   Harvard Mafia : Diplomatic Communication : Surviving a Bad Performance Review : Insufficient Retirement Funds as Immanent Problem of Neoliberal Regime : PseudoScience : Who Rules America : Neoliberalism  : The Iron Law of Oligarchy : Libertarian Philosophy

Quotes

War and Peace : Skeptical Finance : John Kenneth Galbraith :Talleyrand : Oscar Wilde : Otto Von Bismarck : Keynes : George Carlin : Skeptics : Propaganda  : SE quotes : Language Design and Programming Quotes : Random IT-related quotes :  Somerset Maugham : Marcus Aurelius : Kurt Vonnegut : Eric Hoffer : Winston Churchill : Napoleon Bonaparte : Ambrose Bierce :  Bernard Shaw : Mark Twain Quotes

Bulletin:

Vol 25, No.12 (December, 2013) Rational Fools vs. Efficient Crooks The efficient markets hypothesis : Political Skeptic Bulletin, 2013 : Unemployment Bulletin, 2010 :  Vol 23, No.10 (October, 2011) An observation about corporate security departments : Slightly Skeptical Euromaydan Chronicles, June 2014 : Greenspan legacy bulletin, 2008 : Vol 25, No.10 (October, 2013) Cryptolocker Trojan (Win32/Crilock.A) : Vol 25, No.08 (August, 2013) Cloud providers as intelligence collection hubs : Financial Humor Bulletin, 2010 : Inequality Bulletin, 2009 : Financial Humor Bulletin, 2008 : Copyleft Problems Bulletin, 2004 : Financial Humor Bulletin, 2011 : Energy Bulletin, 2010 : Malware Protection Bulletin, 2010 : Vol 26, No.1 (January, 2013) Object-Oriented Cult : Political Skeptic Bulletin, 2011 : Vol 23, No.11 (November, 2011) Softpanorama classification of sysadmin horror stories : Vol 25, No.05 (May, 2013) Corporate bullshit as a communication method  : Vol 25, No.06 (June, 2013) A Note on the Relationship of Brooks Law and Conway Law

History:

Fifty glorious years (1950-2000): the triumph of the US computer engineering : Donald Knuth : TAoCP and its Influence of Computer Science : Richard Stallman : Linus Torvalds  : Larry Wall  : John K. Ousterhout : CTSS : Multix OS Unix History : Unix shell history : VI editor : History of pipes concept : Solaris : MS DOS :  Programming Languages History : PL/1 : Simula 67 : C : History of GCC development :  Scripting Languages : Perl history   : OS History : Mail : DNS : SSH : CPU Instruction Sets : SPARC systems 1987-2006 : Norton Commander : Norton Utilities : Norton Ghost : Frontpage history : Malware Defense History : GNU Screen : OSS early history

Classic books:

The Peter Principle : Parkinson Law : 1984 : The Mythical Man-Month :  How to Solve It by George Polya : The Art of Computer Programming : The Elements of Programming Style : The Unix Hater’s Handbook : The Jargon file : The True Believer : Programming Pearls : The Good Soldier Svejk : The Power Elite

Most popular humor pages:

Manifest of the Softpanorama IT Slacker Society : Ten Commandments of the IT Slackers Society : Computer Humor Collection : BSD Logo Story : The Cuckoo's Egg : IT Slang : C++ Humor : ARE YOU A BBS ADDICT? : The Perl Purity Test : Object oriented programmers of all nations : Financial Humor : Financial Humor Bulletin, 2008 : Financial Humor Bulletin, 2010 : The Most Comprehensive Collection of Editor-related Humor : Programming Language Humor : Goldman Sachs related humor : Greenspan humor : C Humor : Scripting Humor : Real Programmers Humor : Web Humor : GPL-related Humor : OFM Humor : Politically Incorrect Humor : IDS Humor : "Linux Sucks" Humor : Russian Musical Humor : Best Russian Programmer Humor : Microsoft plans to buy Catholic Church : Richard Stallman Related Humor : Admin Humor : Perl-related Humor : Linus Torvalds Related humor : PseudoScience Related Humor : Networking Humor : Shell Humor : Financial Humor Bulletin, 2011 : Financial Humor Bulletin, 2012 : Financial Humor Bulletin, 2013 : Java Humor : Software Engineering Humor : Sun Solaris Related Humor : Education Humor : IBM Humor : Assembler-related Humor : VIM Humor : Computer Viruses Humor : Bright tomorrow is rescheduled to a day after tomorrow : Classic Computer Humor

The Last but not Least Technology is dominated by two types of people: those who understand what they do not manage and those who manage what they do not understand ~Archibald Putt. Ph.D

The statements, views and opinions presented on this web page are those of the author (or referenced source) and are not endorsed by, nor do they necessarily reflect, the opinions of the Softpanorama society. We do not warrant the correctness of the information provided or its fitness for any purpose. The site uses AdSense so you need to be aware of Google privacy policy. You you do not want to be tracked by Google please disable Javascript for this site. This site is perfectly usable without Javascript.

Last modified: March, 12, 2019